Vision System
Customized full auto measurement system
Technical equipment automatic measuring system and line manufacturing
- Eddy current type surface and screw inspection system
- Contact type dimension and appearance measuring system (3D, 2D)
- Material inspection system using acoustic resonance and magnetic
- Combined system for vision and other contact-type or non-contact and contact type measuring
Vision Inspect Machine
| Specification | ||
| Mode | CAM1 | CAM2 |
| Head diameter | Head diameter | |
| Torx shape | Head height | |
| Defect painting | Flange diameter | |
| Check List | Head burst | Total length |
| Surface crack | Screw shape | |
| Burr & Chip | Pitch diameter | |
| Eccentricity | Screw angle | |
| Check Ny-lock | ||
| Parallel screw |
Customized vision inspection machine
| Inspection speed | 600 ea/min (Speed adjustement) |
| Inspection part | Small and medium-sized parts such as long bolts, Screws, Rivets, Pins, Nuts, O-Rings, Spacers, etc. |
| Inspection item | Shape, Dimension, Whip, Thread presence and absence and non-thread, Lead, Special shapes |
Customized vision inspecting machine according to items for inspection and production methods
Measurement machine with non-contact sensor
Measuring by eddy-current inspection method
| Index type | |||||
| Product | Model No. | Items to inspect | Accuracy | Table size | Inspection speed |
| GI-100 | 50mm M3~M5 L | ±0.003~0.03mm | ¢540mm | 500ea/min(Max) | |
| ARTOS OPTIC | GI-200 | M5~M8 70mm | ±0.005~0.03mm | ¢540mm | 400ea/min(Max) |
| GI-300 | M8~M12 L 100mm | ±0.005~0.03mm | Φ700mm | 300ea/min(Max) |
- F.O.V for each model is adjustable; precision may vary depending on F.O.V adjustment
- Working speed may vary depending on the appearnce, items for inspection and inspection precision
- Precision is based on repeated measurements for the same product and may vary depending on the measuring points
This index disk type is suitable for a product that is long in length and has a a neck.
| General specifications | |
| Products for inspection | Bolts Relatively long products, Products that can be hung by the neck |
| Rivet | |
| Screws | |
| Nails | |
| Dimensions, Appearance, Assembly, Tap, Plating, Special shapes | |
| Items for inspection | Screw part) Whether there are screws, Appearance, Misalignment, |
| Parallel screw | |
| Area camera resolution | 2048 x 1088 pixel 2 basic sets (Extension available) |
| Inspection precision | ±0.003~0.03mm (It varies depending on models and camera resolutions) |
| Inspection quantity | 180~500ea/min (It varies depending on models and product sizes) |
| Measurement data | Image saving / Data saving |
| Glass type | |||||
| Product | Model No. | Items to inspect | Accuracy | Table size | Inspection speed |
| GR-100 | M3~M5 50mm | ±0.003~0.03mm | ¢540mm | 300ea/min | |
| ARTOS OPTIC | GR-200 | 70mm M5~M8 L | 0.004~0.03mm | ¢540mm | 240ea/min |
| GR-300 | M8~M12 100mm | ±0.005~0.03mm | Φ700mm | 180ea/min |
- F.O.V for each model is adjustable; precision may vary depending on F.O.V adjustment
- Working speed may vary depending on the appearnce, items for inspection and inspection precision
- Precision is based on repeated measurements for the same product and may vary depending on the measuring points
This glass disk type is suitable for a product with wide bottom and easy to stand
| Products for inspection | Relatively long products, Products with lower center of gravity Bolts |
| Nuts | |
| Pressed product | |
| Ring, Washer | |
| Dimensions, Appearance, Assembly, Tap, Plating, Special shapes | |
| Items for inspection | Screw part) Whether there are screws, Appearance, Misalignment, |
| Parallel screw | |
| Area camera resolution | 2048 x 1088 pixel ) 2 basic sets (Extension available) |
| Inspection precision | ±0.003~0.03mm (It varies depending on models) |
| Inspection quantity | 200~300ea/min (It varies depending on models and product sizes) |
| Measurement data | Image saving / Data saving (ERP interlocked) |